So I put my PC to sleep, and unplugged it shortly after to move it. Today I try turning it back on, and I get a no signal message on my monitor screen. I tested the monitor with other devices so this is not the issue. So far I have tried:
reseating the ram sticks
pulling out the CMOS battery
reseating the graphics card
attempted to power cycle by doing various plug/unplug methods.
Any suggestions/possible solutions would be greatly appreciated
reseating the ram sticks
pulling out the CMOS battery
reseating the graphics card
attempted to power cycle by doing various plug/unplug methods.
Any suggestions/possible solutions would be greatly appreciated