I was nearing the capacity on my old 1 TB HDD so I decided to upgrade to a 2TB. I went ahead and dual booted it on my editing PC so I could install Windows 10 and manually move all of my programs and settings onto it, I activated Win10 with an old OEM version I had (meant to do that once it was installed into the old pc) and then swapped the drives.
At that point, I continuously got "reboot and select proper boot device or insert boot media in selected boot device and press a key" Same as this. I proceeded to attempt to boot from the new drive and then moved it to the front of the boot order - Nothing. I tried swapping between Legacy + UEFI boot and UEFI boot - no help. I then swapped the old drive in and have the same issue now.
I hooked up both drives to my editing computer with my usb adapter and am able to access the files on both of them so it's not the hardware. I also checked all of the cable connections while they were in there twice, I don't really know how to proceed at this point.
At that point, I continuously got "reboot and select proper boot device or insert boot media in selected boot device and press a key" Same as this. I proceeded to attempt to boot from the new drive and then moved it to the front of the boot order - Nothing. I tried swapping between Legacy + UEFI boot and UEFI boot - no help. I then swapped the old drive in and have the same issue now.
I hooked up both drives to my editing computer with my usb adapter and am able to access the files on both of them so it's not the hardware. I also checked all of the cable connections while they were in there twice, I don't really know how to proceed at this point.