Computer takes three tries to start up

Parker8283

Commendable
Dec 16, 2016
1
0
1,510
Just built:

ASRock H170M Pro4, i3-6100, 8GB RAM (2x4GB), Kingston 120GB SSD, WD Blue 1TB, no additional video card.

For some unknown reason, when booting up the computer, it begins to start up, shows the ASRock logo, then just turns off; it doesn't reboot by itself after a while. I turn it back on, I get a BSoD from Win10. The error changes each time, but recently it's been System Thread Exception Not Handled. The offending file changes too, recently it's been fltmgr.sys and ACPI.sys.

Considering it eventually starts up and shows all the hardware I've listed, I don't think any of the parts are bad.

What do?

Thank you!
 
Solution
With all problems with this i always start with trying to take out ram and try to start with one stick, try different stick and in different slots. Second i would suggest you try a different power supply.

If you open your case, beeps and red lights on the motherboard can give you alot of information where the problem is.

Rhavina

Commendable
Dec 16, 2016
8
0
1,520
With all problems with this i always start with trying to take out ram and try to start with one stick, try different stick and in different slots. Second i would suggest you try a different power supply.

If you open your case, beeps and red lights on the motherboard can give you alot of information where the problem is.
 
Solution