Computer turns on, No Video Signal output

[Bombazzi]

So I started building my computer a few months ago and I keep running into the problem of no video output. The computer turns on just fine but my monitor doesn't get any sort of video signal. I went to best buy and I have sent back both my motherboard and my graphics card.
Mobo: ASRock E3V5 Performance Gaming/OC ATX LGA1151
CPU: Intel Pentium G4560 3.5 GHz Dual-Core LGA 1151 Processor
Graphics card: EVGA GeForce GTX 1060 6GB 6GB GAMING Video Card
RAM: G.Skill Ripjaws V Series 16GB (2 x 8GB) DDR4-3000 Memory
PSU: EVGA 500W 80+ Bronze Certified ATX Power Supply

 

[Herc08]

What connector are you using? Are you plugging it into the GPU backplate? If you are using displayport, have you tried both ports? Have you tried another monitor? Is the fans spinning on the GTX 1060?

 

[Corwin65]

Is your BIOS compatible with Kabylake? Does it need a BIOS update?

You need version P7.20 of the BIOS for Kabylake.

http://www.asrock.com/mb/Intel/Fatal1ty%20E3V5%20Performance%20GamingOC/?cat=CPU

 

[Bombazzi]

What connector are you using? Are you plugging it into the GPU backplate? If you are using displayport, have you tried both ports? Have you tried another monitor? Is the fans spinning on the GTX 1060?

I am plugging it into the GPU. There is no display port for the mother board. I have tried another monitor. And yes the fans are spinning on the GTX.

 

[Bombazzi]

Is your BIOS compatible with Kabylake? Does it need a BIOS update?

You need version P7.20 of the BIOS for Kabylake.

http://www.asrock.com/mb/Intel/Fatal1ty%20E3V5%20Performance%20GamingOC/?cat=CPU

I am not sure. Most others that I brought the problem to didn't say anything about it.