Computer won’t display but powers on

[techiezgaming]

so this is probably a forum topic that gets posted quite a lot so let me keep it quick. I’ve tried repositioning ram, taking out and placing back in the cmos battery, changing monitors and hdmi cords. Took out my gpu. I even took apart my cpu and repositioned it to see if that was the problem still no luck.

Context:
It all started after I built my pc I set it on my desk and it booted up fine. I think it was coincidence but after I bumped the table the computer kept restarting over and over in a frightful panic I force shut down my pc and here we are today. I thought maybe my mobo fried but the power led indicator is lit and all my components are getting power and seem to be functioning.... any help is gladly appreciated.

 

[scout_03]

you bumped the table you have a hdd in so try to use another one to see it if work also check if the gpu or any others parts are not out of there slots .

 

[techiezgaming]

I checked all the connections and still no luck I have two hdds and checked both still no display. I connected the hdmi to the motherboard so gpu should not be an issue

 

[scout_03]

when you did use the internal for test did you remove gpu from board you might have to do a breadboarding test something could be making ground with the case .