Computer won't boot after new ram

[drose3989]

So I recently decided to upgrade from 8gb of this ram http://www.amazon.com/gp/product/B008LTJJM2?psc=1&redirect=true&ref_=oh_aui_search_detailpage to 16gb of this ram http://www.amazon.com/gp/product/B006WAGGUK?psc=1&redirect=true&ref_=oh_aui_search_detailpage I am completely getting rid of my original ram, and putting in a fresh 16gb of my new ram. However, whenever I installed my new ram, my computer will not boot into windows. I am fairly positive that these two different models have the same specs, so the new model should work in my motherboard, right?
Another thing, If I put in 2 of the sticks, it will let me boot to bios, but if I put in all 4, then it starts to turn on and then suddenly turns off and repeats the process.

Also this is my motherboard
http://www.amazon.com/gp/product/B009HP42HQ?psc=1&redirect=true&ref_=oh_aui_search_detailpage
Any suggestions would help!!

 

[Supahos]

Mixing memory isn't a good idea, but your best bet is to try setting speed to 1600 with 10-10-10-27 timings and dram voltage of 1.6v

 

[drose3989]

Mixing memory isn't a good idea, but your best bet is to try setting speed to 1600 with 10-10-10-27 timings and dram voltage of 1.6v

Is it still considered mixing memory even if i completely removed the Patriot ram? I currently only have 1 brand in...

 

[hang-the-9]

Boot with the RAM that is working and do a BIOS update, see if things work then. Also check on the motherboard manual, the RAM density may be an issue with using all 4 slots.