Computer won't boot. ASRock Z77 Extreme 4 Dr. Debug Error Codes 4F and 67

[ozmafan]

Hello,
a few days ago I reset my computer but when it tried to boot, all the fans came on for about 7 seconds then shut off. Every time I attempt to boot the same thing happens and I get the error codes 4F (DXE IPL is started) and 67 (CPU DXE Initialization) on my motherboard. All fans are currently spinning when I attempt to boot. I have been using the computer for over a year now with no issues.

Things I have tried that haven't worked:
Replacing the power supply.
Replacing the processor.
Replacing the Ram.
Clearing the CMOS

List of my computer parts:

Motherboard: ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard

Power Supply: Cooler Master GX - 750W Power Supply with 80 PLUS Bronze Certification
PNY VCGGTX670XPB GeForce GTX 670 2GB 256-Bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card

Video Card:PNY VCGGTX670XPB GeForce GTX 670 2GB 256-Bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card

Processor: Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo) LGA 1155 77W Quad-
Core Desktop Processor

Ram: G.SKILL Ares Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) Desktop Memory Model F3-1866C10D-16GAB

 

[alexoiu]

Hi, Try clearing the CMOS and then starting with only CPU and CPU fan. See what code getting.

 

[Dark Lord of Tech]

Possible corrupted BIOS chip?

 

[James Mason]

67 "could" be that your CPU fan is screwed on too tight:http://forums.tweaktown.com/asrock/50260-z77-extreme4-led-error-code-64-a.html
Also could be making sure the RAM is seated Properly: http://www.overclockers.com/forums/showthread.php?t=705092
Inspect the CPU/Socket to see if there are any bent pins: http://rog.asus.com/forum/archive/index.php/t-22755.html?s=55a1f5c1eecdb1a37d9e9000a25364fe
And like the others said, could be corrupted BIOs chip, was there a power outtage/blackout recently? A powersurge could have damaged your computer.

 

[ozmafan]

Hi, Try clearing the CMOS and then starting with only CPU and CPU fan. See what code getting.

I tried that and got the error code 20 which doesn't have a correlating message in the instillation manual.

 

[ozmafan]

Possible corrupted BIOS chip?

Don't think it's that because I had thought maybe the entire motherboard needed to be replaced so I bought another one and the same thing is happening.

 

[ozmafan]

67 "could" be that your CPU fan is screwed on too tight:http://forums.tweaktown.com/asrock/50260-z77-extreme4-led-error-code-64-a.html
Also could be making sure the RAM is seated Properly: http://www.overclockers.com/forums/showthread.php?t=705092
Inspect the CPU/Socket to see if there are any bent pins: http://rog.asus.com/forum/archive/index.php/t-22755.html?s=55a1f5c1eecdb1a37d9e9000a25364fe
And like the others said, could be corrupted BIOs chip, was there a power outtage/blackout recently? A powersurge could have damaged your computer.

Checked the CPU fan and tried different configurations, even tried replacing the CPU fan but that didn't work.

Have checked and rechecked the RAM and it is seated correctly.

I thought it could be the BIOS chip but that has been replaced because I bought a brand new motherboard and that didn't fix it.

 

[ozmafan]

Additional Information:

When I switch the power supply switch to on the computer immediately boots without me pressing the power button on the motherboard or my case. This led me to believe my motherboard was malfunctioning which is why I bought a new one. After installing the new motherboard I was sad to see the exact same thing keeps happening.

I am all out of solutions.

 

[ozmafan]

I FIGURED IT OUT!

It was my stupid case. The power button was malfunctioning and I didn't have the sense to unplug it from my motherboard. Thanks for your answers.