[SOLVED] Computer won't boot; EZ Debug LED is stuck on Boot.

[SpeedStepTi]

Note: This is a more formal and comprehensive version of my Original Post.

Computer Specs:
MSI B450M Mortar (BIOS Rev. 7B89v1D)
AMD Ryzen 5 2400G (Stock Clocks)
G.Skill TridentZ RGB 16GB 3200MHZ CL16
Palit Jetstream Geforce GTX 980 4GB
Corsair VS550
ID Cooling AuraFlowX 240mm
Seagate Barracuda 1TB 7200rpm
HikVision C100 240GB SATA3 SSD

Description of the issue:

I went to startup my computer as I normally do. But, when I did that today, the computer would not display anything. But, I knew it booted successfully, as ramped up to 100%. I noticed the LED for Boot in the EZ debug was on the entire time. What could be the reason for this? What I think is that the SATA cable for the SSD came loose, and maybe dust affected it. What do you guys think? Please help me out here.

 

[Vic 40]

Sata cable is easy to check, try another one, maybe from the hdd just for testing if those are all you have.

Can also try different sata ports on the motherboard.

You can get into the bios?