Question Computor turning off and on with one contunious beeping

[Lupica7]

My computor i just ordered from cyperpower is turning off and on again. I called support for and earlier issue and they told me a to do a factory reset. Afterwards its doing this when windows started to download.
Specs are

• CAS: CYBERPOWERPC X-Saber 620 RGB Mid-Tower Gaming Case w/ USB 3.0, Full-Size Tempered Glass Window (Black Color)
• CPU: AMD Ryzen 7 1700 3.0GHz [3.7GHz Turbo] Eight-Core 16MB L3 Cache 65W Processor
• CS_FAN: Default case fans
• FAN: CyberPowerPC MasterLiquid Lite 120mm ARGB CPU Liquid Cooler with Dual Chamber Pump & Copper Cold Plate (Single Standard 120MM Fan)
• HDD: 240GB WD Green SSD + 2TB SATA III Hard Drive Combo (Combo Drive)
• MEMORY: 16GB (8GBx2) DDR4/3000MHz Dual Channel Memory (ADATA XPG Z1)
• MOTHERBOARD: MSI X470 GAMING PLUS AM4 ATX w/ RGB, USB 3.1, Gbt LAN, 3 PCIe x16, 3 PCIe x1, 6 SATA3, 2 M.2 SATA/PCIe
• OS: Windows 10 Home (64-bit Edition)
• OVERCLOCK: No Overclocking
• POWERSUPPLY: 600 Watts - Standard 600Watts 80 Plus Gold high-efficient Power Supply
• VIDEO: AMD Radeon RX 590 8GB GDDR5 Video Card [VR Ready] (Single Card)

 

[R_1]

continuous beeping? one long beep? two beeps, pause repeat? three short pause two long beeps?
the beeps are telling you the issue. beep codes are the BIOS telling you what failed the POST process. Power On Self Test or post is run at every boot, a short single beep is the usual POST passed signal.
take at look here
https://forum-en.msi.com/faq/article/bios-beeps-and-codes

 

[Lupica7]

continuous beeping? one long beep? two beeps, pause repeat? three short pause two long beeps?
the beeps are telling you the issue. beep codes are the BIOS telling you what failed the POST process. Power On Self Test or post is run at every boot, a short single beep is the usual POST passed signal.
take at look here
https://forum-en.msi.com/faq/article/bios-beeps-and-codes

Its just one very long beep nothing else

 

[R_1]

https://forum-en.msi.com/faq/article/bios-beep-codes
1 beep memory refresh problem
with system off and while touching the case, remove both RAM sticks, boot system and see what the motherboard beeps at you with no RAM. record results.
then insert one stick and try to boot, if nothing swap sticks and try again.