Connect to WIFI Network with Intel LAN card?

[Kyle_77]

So I have a Intel PRO Wireless 2100B Wireless LAN card. It works with Windows 98 and ME. I have the drivers and installed them, but how do I connect to my WiFi network?(wifi network uses WPA2-Personal)

 

[Calvin7]

Intel PRO Wireless 2100B Wireless LAN uses 802.11b Data Link Protocol.

IEEE 802.11b products appeared on the market in mid-1999.

It uses the following Encryption Algorithm:
128-bit WEP, 64-bit WEP, LEAP, TKIP, TLS, WPA

WPA2-Personal is not supported.

System Requirements/
OS Required
Microsoft Windows 2000 / XP, Microsoft Windows 98, Microsoft Windows 98 Second Edition, Microsoft Windows NT 4.0

You might try broadcasting in the open with no security.

 

[Kyle_77]

Intel PRO Wireless 2100B Wireless LAN uses 802.11b Data Link Protocol.

IEEE 802.11b products appeared on the market in mid-1999.

It uses the following Encryption Algorithm:
128-bit WEP, 64-bit WEP, LEAP, TKIP, TLS, WPA

WPA2-Personal is not supported.

System Requirements/
OS Required
Microsoft Windows 2000 / XP, Microsoft Windows 98, Microsoft Windows 98 Second Edition, Microsoft Windows NT 4.0

You might try broadcasting in the open with no security.

How would I connect it to the WEP network?

 

[USAFRet]

Intel PRO Wireless 2100B Wireless LAN uses 802.11b Data Link Protocol.

IEEE 802.11b products appeared on the market in mid-1999.

It uses the following Encryption Algorithm:
128-bit WEP, 64-bit WEP, LEAP, TKIP, TLS, WPA

WPA2-Personal is not supported.

System Requirements/
OS Required
Microsoft Windows 2000 / XP, Microsoft Windows 98, Microsoft Windows 98 Second Edition, Microsoft Windows NT 4.0

You might try broadcasting in the open with no security.

How would I connect it to the WEP network?

You'd have to enable WEP in the router.
But that is little better than no security at all.

 

[Kyle_77]

So once I enable WPA how do I connect Windows 98 to it?

 

[USAFRet]

So once I enable WPA how do I connect Windows 98 to it?

WPA on the router, and then go through the setting in the WiFi device on the PC to connect to it.

 

[Kyle_77]

So once I enable WPA how do I connect Windows 98 to it?

WPA on the router, and then go through the setting in the WiFi device on the PC to connect to it.

Where are the settings? In the driver software or in Control Panel?

 

[USAFRet]

So once I enable WPA how do I connect Windows 98 to it?

WPA on the router, and then go through the setting in the WiFi device on the PC to connect to it.

Where are the settings? In the driver software or in Control Panel?

Probably in the driver software.

 

[Kyle_77]

So once I enable WPA how do I connect Windows 98 to it?

WPA on the router, and then go through the setting in the WiFi device on the PC to connect to it.

Where are the settings? In the driver software or in Control Panel?

Probably in the driver software.

I changed the network to 64bit WEP,I can't seem to connect to the network?

 

[USAFRet]

I changed the network to 64bit WEP,I can't seem to connect to the network?

WEP needs to be enabled on both ends.
The PC and the router.

 

[Kyle_77]

I changed the network to 64bit WEP,I can't seem to connect to the network?

WEP needs to be enabled on both ends.
The PC and the router.

How to enable WEP on PC? Let me send my router settings

 

[Kyle_77]

http://imgur.com/a/Wis5y

 

[USAFRet]

http://imgur.com/a/Wis5y

OK, that's the router settings.
Now do similar for the PC WiFi settings.

 

[Kyle_77]

How?!

 

[USAFRet]

How?!

The application that was installed with the driver and hardware for the PC.
The setting is in there.

 

[ragnar-gd]

@Kyle_77:
Be reminded that when doing the setting as above, a hacker in range (about 100 yards, maybe more) will need minutes at best to enter your WLAN.