[SOLVED] Connected to the same Router but Unidentified Network?

Jun 20, 2020
4
0
10
Hello.
My laptop's WiFi & Ethernet are connected on the same router. But my Ethernet somehow shown as "Unidentified Network".
I tried to connect with my GF laptop and it was fine. Her laptop connected to Ethernet just fine. But when i tried it with my laptop it doesn't want to connect.
I've Tried
  1. /release /renew
  2. Netsh winsock
  3. Updating Driver
  4. Uninstalling Driver
  5. Restarting my router
  6. Switch another port
My DHCP is Disabled because when i Enabled it.
My IP and Subnet Mask will become
169.254.x.x
255.255.0.0

Therefore i had to manually assign my IP
Here is my ipconfig /all


Windows IP Configuration

Host Name . . . . . . . . . . . . : LAPTOP-DICJHBES
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GbE Family Controller
Physical Address. . . . . . . . . : B4-B6-86-E8-EC-B2
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 1:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #3
Physical Address. . . . . . . . . : 76-40-BB-83-64-6D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 4:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #4
Physical Address. . . . . . . . . : F6-40-BB-83-64-6D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Ethernet 5:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : USB to Ethernet Adapter #2
Physical Address. . . . . . . . . : 00-06-1A-0D-2E-2A
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.151(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 1.1.1.1
1.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wi-Fi:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8822BE 802.11ac PCIe Adapter
Physical Address. . . . . . . . . : 74-40-BB-83-64-6D
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.55(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 1.1.1.1
1.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 74-40-BB-83-64-6E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
 
Solution
What is your router´s IP address? Is DHCP disabled (static IP enabled) there too?

Disable the onboard ethernet controller

what happens if you disconnect the USB ethernet adapter?


check windows integrity
open the command prompt as administrator and type DISM /Online /Cleanup-Image /RestoreHealth
https://www.lifewire.com/how-to-open-an-elevated-command-prompt-2618088
https://answers.microsoft.com/en-us...em-files/bc609315-da1f-4775-812c-695b60477a93


clean boot
https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows
What is your router´s IP address? Is DHCP disabled (static IP enabled) there too?

Disable the onboard ethernet controller

what happens if you disconnect the USB ethernet adapter?


check windows integrity
open the command prompt as administrator and type DISM /Online /Cleanup-Image /RestoreHealth
https://www.lifewire.com/how-to-open-an-elevated-command-prompt-2618088
https://answers.microsoft.com/en-us...em-files/bc609315-da1f-4775-812c-695b60477a93


clean boot
https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows
 
Solution