connection on 865gl?

[Maitai]

I have an Intel La Crosse D865GLC motherboard.

I just opened my case to blow out all the dirt antd dust.
I had to remove my front panel to clean it out too.

Being put together, evrything works but the hdd led and reset switch.

On the motherboard bottom right are 4 sets of double pins and a single one.

I connected the components from left to right: as follows:

Res switch, HDD led and power switch.
Left the 4th duoble pin open, nothing else to connect.

I even swapped the led and res switch connections around, but it doesn't solve the problem, and I really ca't remember how they were supposed to be exept for power switch, which works fine.

Maybe i damaged them on the front panel.

Any help?

 

[Maitai]

OK, i got the reset switch to work, but not the hdd led.
Too afraid to move anything else, so leaving it as it is. I don't look at the hdd led anyway.

 

[g-paw]

The mobo manual will tell you the pin set up, if you don't have it, should be able to find it on the mfg website

 

[Maitai]

Hey thanks.

I was surprised to see that the guys did indeed put the drawing of the mobo in that small box of stuff.

After an hour trying to figure out how these drawings work, i finally cracked it, now everything's working beautifully.

Thanks for the reply.

 

[g-paw]

Glad it worked out