Hello. These are my PC specs :
Asus a320m-k Prime motherboard
Ryzen 5 2600
8gb Ram (3200 mhz but I'm using it on 2133)
My first ram used to be an ADATA 2400Mhz CL17 ram, which was quite stable and worked just fine. I got a wish to buy a faster ram, so I bought a GEIL ORION AMD Edition 3200Mhz Cl16 8GB ( GAOG48GB3200C16ASC). Once I installed the RAM I had quite a bit of trouble running at its max speed, mainly PC not being able to boot, then PC freezing and crashing when I would underclock it to 2933 and 2666. Then I underclocked it to 2400 and it worked okay except for the fact that I was often getting BSOD's with stop codes : MEMORY MANAGEMENT, IRQL_NOT_LESS_OR_EQUAL and most recent ( I only got it once) DRVER POWER STATE FAILURE.
This usually happens every day but sometimes I manage to make 2-3 days before the PC crashes. Initially I thought that it was a faulty RAM, but now I'm thinking that it could also be the motherboard, because this is the weakest AMD chip, and the motherboard at first wasn't even designed for this CPU by default, I am really not a hardware guy.
I have moved the RAM from the A1 slot to B1 slot. So far it is working fine ( at the factory default settings).
What do you think might be the case? Any help would be appreciated, it is extremely annoying when you get a BSOD in a middle of your work.
Asus a320m-k Prime motherboard
Ryzen 5 2600
8gb Ram (3200 mhz but I'm using it on 2133)
My first ram used to be an ADATA 2400Mhz CL17 ram, which was quite stable and worked just fine. I got a wish to buy a faster ram, so I bought a GEIL ORION AMD Edition 3200Mhz Cl16 8GB ( GAOG48GB3200C16ASC). Once I installed the RAM I had quite a bit of trouble running at its max speed, mainly PC not being able to boot, then PC freezing and crashing when I would underclock it to 2933 and 2666. Then I underclocked it to 2400 and it worked okay except for the fact that I was often getting BSOD's with stop codes : MEMORY MANAGEMENT, IRQL_NOT_LESS_OR_EQUAL and most recent ( I only got it once) DRVER POWER STATE FAILURE.
This usually happens every day but sometimes I manage to make 2-3 days before the PC crashes. Initially I thought that it was a faulty RAM, but now I'm thinking that it could also be the motherboard, because this is the weakest AMD chip, and the motherboard at first wasn't even designed for this CPU by default, I am really not a hardware guy.
I have moved the RAM from the A1 slot to B1 slot. So far it is working fine ( at the factory default settings).
What do you think might be the case? Any help would be appreciated, it is extremely annoying when you get a BSOD in a middle of your work.