Constant restart after software overclocking with EasyTune6

[HobbyMan]

Hi guys,

my PC won't start, after I made an unheard stupid move and tried to overclock i7-3730 (non "K" CPU) using the Easy Tune6. :/

I set the ratio, using Easy Tune6 from the standard 37 to 39 and 38 and after a reboot, and short win loading screen, an error pops on a blue screen and the computer is turned off!

I have try to Clear CMOS Values with Jumper and after I load "Bios default values" - same thing happen! Short win loading screen, then blue screen error and restart!

When I go to bios I can see that CPU Ratio is still the same - 39, instead auto value of 37 (default for i7-3730)

Here is picture from bios, 39 CPU Ration won't go away! :/

Blue screen message that appear just a few seconds before new restart:

Here is the video of what happen every time I start this PC:
[video="https://www.youtube.com/watch?v=1OqCsS1OW5s"][/video]


I would really appreciate any help :/

Thanks!

Motherboard is Gigabyte GA-z77m-d3H

P.S.
I have also try to manually to change CPU Ratio values on 37, but after every boot, and this error, ratio 39 magically appear in BIOS!

EasyTune 6 is gigabyte software, I do not understand why it makes me this problem.

 

[popatim]

Reset your cmos and see if that clears up the problem.
Otherwise consult your motherbd manual and and switch to the backup UEFI (bios) and restore/update the primary.