Control fan speed H81M-E34

[Cinderblox]

Hello here is my system :
-i7 4790
-16 GB Ram
-H81M-E34
-r9 380
-Cooler Master k-380
-Cooler Master fan SickleFlow 120(*)

And here is my question: I put a new system fan(*) in my PC but it always blows very fast. And is noisy. How do I control it? I do not want to buy a controller at all.

The rear preinstalled 3pin fan is in the 4 pin header "system fan 1" and blows at 5v 700rpm wich is perfect. The second new one is installed on the "system fan 2" header but I can't see it in software(speedfan) nor do i see it in bios any readings on it's speed. It blows at full speed i gues.

Is there any way to reduce the voltage or just set a speed for this fan as it is very noisy.


extra: I have not been able to change the speed of the first fan either. I am new with this.

 

[Calvin7]

MSI uses Smart Fan Control with liner mode. The Command Center utility can be installed to automatically control the fan speeds according to the CPU’s and system’s temperature.

 

[Cinderblox]

MSI uses Smart Fan Control with liner mode. The Command Center utility can be installed to automatically control the fan speeds according to the CPU’s and system’s temperature.

Still the same problem, there are 2 fans installed but the second one always runs at full speed and is not detected.

 

[shakree28]

MSI uses Smart Fan Control with liner mode. The Command Center utility can be installed to automatically control the fan speeds according to the CPU’s and system’s temperature.

Still the same problem, there are 2 fans installed but the second one always runs at full speed and is not detected.

hello i am having the same exact situation. did u find any solution for it?