Cooler Master CM690 III Cooling solution

[chegalhavara]

Hey guys
So I have this case with the original coolers: 200mm front intake and 120mm back outtake.
Considering on buying 2x140mm to improve the cooling inside the case although I have no major problems.
You can see my gear on my profile.
So what should I do? Leave the 200mm in front and install the 2x 140mm on top for outtake?
Or the 2x 140mm in front for intake and the 200mm on top for outtake?
I still have the 120mm rear outtake and my Zalman CNPS 9900Max pushing towards the rear.

Any thoughts or advices?

 

[Zerk2012]

If your not having issues then their no reason to even add more. Adding more fans don't always mean improved cooling.

 

[chegalhavara]

I got about 29C when idling and 60C on a stress test. At stock speeds.. I'd like a bit more room for overclocking if I'm in the mood for it.
If I really decide to buy the fans, what would you advise?
Btw the fans I'm thinking of are these
https://www.amazon.de/Thermaltake-Riing-LED-Geh%C3%A4usel%C3%BCfter-schwarz/dp/B00V80BG9A/ref=sr_1_15?ie=UTF8&qid=1481642324&sr=8-15&keywords=geh%C3%A4usel%C3%BCfter+140mm+rot
Thermaltake Riing 14 LED

 

[Zerk2012]

Improve your CPU cooler then.

 

[chegalhavara]

The Zalman CNPS 9900Max is supposed to be a good CPU Cooler. In the same degree of performance as the Noctua NH14, although a little louder.
Maybe I need to take it off, put some new Thermal paste and put it on again..
I also think that 60C may be a little to high for a 6700K at stock..

 

[chegalhavara]

Well I decided to order 2 of these babies: Corsair ML140 PRO Red.
http://www.corsair.com/en/ml140-pro-led-red-140mm-premium-magnetic-levitation-fan

I'm going to put the 200mm cooler from the front to the top back for outtake, with the 120mm in the back also for outtake and mount these 2 in the front for intake.
Hope to get some extra cooling with the good looks. These will at least look cool with the red leds in the front of my case..