Cooler Master Hyper 212 evo standoff brass sizing

[enri.fc.98]

Hello everyone! I bought an used CM Hyper 212 evo and it came with no standoffs or screw, just the bracket, the fan and the backplate.

I thought of buying it on the cooler master store, but I have to pay more than 10€ for shipping, so I'm going to 3d print them.

If you have the same cooler than I do, can you please measure the stand-off size? Not the LGA 2011 version, just the regular ones included in the fan box.

They have a m3 thread, I just need to know the tall base, the tall thread and the wrench sizing.

EDIT: I will attach an image so you can see what do I mean, they are the letter C on this image https://i.gyazo.com/5e3105da376a255eb5049e07bc35a3a5.png

Thank you all for reading!

 

[madmatt30]

If you don't have the spring loaded screws for the x-bracket you are wasting your time.

They are totally non-standard & cannot be replaced by standard screws.

 

[enri.fc.98]

If you don't have the spring loaded screws for the x-bracket you are wasting your time.

They are totally non-standard & cannot be replaced by standard screws.

Hello Mark, first of all thanks for answering.

I have the spring loaded screws for the x-bracket. The only thing that I want to replace are the standoffs mounted between the motherboard and the x-bracket, the thing that you mount the x-bracket on.

I'll attach an image of the m3 standoff spacer screws, they are standard.
https://alexnld.com/wp-content/uploads/2015/11/ef47de57-d639-4f78-ad9e-c4a5e23e9694.jpg