Cooler master hyper T4 orientation in the cabinet

[mpadhu]

Hi Folks,

I am gonna purchase CM Hyper T4 and my cabin fits the cooler in the position shown in below picture(taken from other post for reference) but there is no upper exhaust in my cabinet. The upper cabinet is fully closed. So is it OK to mount in this position without upper exhaust. Please advice.

 

[BadActor]

I would rotate it so that the hot air from the cooler is exhausted by the rear case fan. It won't interfere with RAM removal either.

 

[mpadhu]

I would rotate it so that the hot air from the cooler is exhausted by the rear case fan. It won't interfere with RAM removal either.

Thanks for your response. This cooler can be oriented only in this position in my motherboard. I have FM2+ socket board with AMD A10-7850K APU. The fan can either face up or down in the cabinet but cannot face rear or front side.

 

[BadActor]

Ah, I see. That really wouldn't be ideal since the hot air won't be able to be exhausted as easily. You might consider a cooler like the Cryorig C7 which will also help cool the VRM's on your motherboard

 

[mpadhu]

Thanks for your response. I have selected another cooler. Could you tell me if the cooler in below link is fine. I have budget constraint so have chosen this. Hoping this will be good.

http://s.aliexpress.com/aINjmqai

 

[BadActor]

If you're not overclocking, looks like it would be OK. It gets very positive reviews on Newegg.

 

[mpadhu]

If you're not overclocking, looks like it would be OK. It gets very positive reviews on Newegg.

I am attaching my cabinet picture. Is it ok to face the Hyper T4 in a position such that the fan at the top so that it pushes air from top to bottom? There is no upper exhaust. But it has front, rear and side exhausts.

Picture of cabinet interior

 

[BadActor]

All I can say is, you'll just have to try it. You'll be pulling the warmest air from inside your case to cool the CPU, which isn't ideal either.