Cooler Master MasterLiquid Maker 92 Front Fan

[gatlin.nathan2]

Hey guys,

I have plugged in everything seemingly correct and my rear fan is working fine, so i see no reason for the front fan to work. It is plugged into this AIO cooling unit correctly as shown in all the documentation that I have found but, for some reason it doesn't want to work.

Do you guys think Cooler Master may have sent me a faulty fan?

Thanks,

Nate.

 

[Lutfij]

Regarding the splitter used to pair a Fan header and the SATA power connector, is the FAN header on your board used a CPU_FAN header?

Might want to show us a pic of how you're connected, for both the fans and the AIO's power and signal cable, if you've followed through the manual, accordingly.

 

[gatlin.nathan2]

It is in fact connected to the cpu fan header, and the sata power is also connected. I would take a picture but you cannot see it because of how small my mini-itx case is. The AIO is getting power and the pump is working. The rear exhaust fan is also working just not the front. I have ran benchmarks and temps are all good but, it is slighlty irritating that I cannot get the intake fan to do anything.