Coolermaster Copper Cooler CB5-5G12 any good?

[Guest]

Does anybody have a Coolermaster CB5-5G12 Socket A cooler? Has anybody tested it? It is made of copper, but the airflow of the fan isn´t that much, below 10 cfm.
My athlon is still running at the rated 800MHz, but is it safe to overclock with this cooler?

Some info on this cooler:
Sink: L52 x W50 x H25 (mm) (Copper)
FAN Dimensions 50 x 50 x 10 (mm)
Rated Speed 4400 RPM
Air Flow 9.18 CFM
Noise Level 30.5 dB(A)

Would the DP5-6H53 have been better?
Sink: L60 x W60 x H36 (mm) (Aluminium)
FAN Dimensions 60 x 60 x 15 (mm)
Rated Speed 4600 RPM
Air Flow 18.36 CFM
Noise Level 32.8 dB(A)

 

[Guest]

Ok, i overclocked it to 1Ghz now, and it is 50 degrees C max under heavy load and 30-35 degrees C under normal load (right now).
I used the multiplier *10 to reach 1Ghz. but if i set the FSB +5 on my Abit KT7, then the temp goes up some more.. how far can i go?

 

[mpjesse]

50 degrees is kinda high buddy... those copper heatsinks are pretty nice, but putting a fan with only 10cfm on it is a bad Idea... I'd put at least a 20cfm fan on it. go to www.inflowdirect.com they have goood fans for sale.

-MP Jesse