CoolerMaster Seidon 120 V3 Plus Airflow Situation

[Hazinator]

Hello there, so I recently bought a Seidon 120 V3 Plus. I used to have a very old water cooler but it went bust so I've been on stock for about a month now. I know how to install it and everything, but Im wondering where I should put the fans and radiators and where the air flow should go. Push / Pull or Both Pull or both Push? I have room at the top and I would have room at the back if I moved a fan. I currently have a fan at the front pulling air in and one at the back which is pulling the air through so it exits out the other side. Should I mount CPU cooler on back or top and which configuration would I have to follow if it was at the top? I just need suggestions really. By the way, the cooler has a radiator and 2 fans, one on the outside of the radiator and one on the inside preferably or I could detach them and only have one fan next to the radiator. I just need some advice really, sorry if it sounded complicated. Thanks ~ Haz

 

[nitinvaid20]

You should mount it at the Rear(Back) Of the Case with Push pull config as Exhaust at end

 

[Hazinator]

You should mount it at the Rear(Back) Of the Case with Push pull config as Exhaust at end

Alright nice thanks, should the current exhaust fan be used at the top?

 

[nitinvaid20]

You should mount it at the Rear(Back) Of the Case with Push pull config as Exhaust at end

Alright nice thanks, should the current exhaust fan be used at the top?

Yes you can use that