Coolers for dual Xeons

[PeeR_SaBBi]

I've went ahead and bought two 2650v2 xeons, a Supermicro X9DRI-LN4F+ dual CPU SSI-EEB (E-EATX) motherboard, and 32GB of Hynix ECC memory, my problem now is what cooler to get, I had looked at the Be Quiet! Pure Rock, and the beloved Cooler Master 212 evo, but I'm worried that they simply don't have enough contact as they're low end and were probably designed around the 115x platform. I'm wondering if you have any recommendations as to what coolers would serve well.

 

[guanyu210379]

2650v2 uses LGA2011, if I remeber it correctly.
CM Hyper 212 and BeQuite! Pure Rock should support LGA2011
http://eu.coolermaster.com/de/cooling/hyper-series/hyper-212-evo/
http://www.bequiet.com/de/cpucooler/532

 

[PeeR_SaBBi]

2650v2 uses LGA2011, if I remeber it correctly.
CM Hyper 212 and BeQuite! Pure Rock should support LGA2011
http://eu.coolermaster.com/de/cooling/hyper-series/hyper-212-evo/
http://www.bequiet.com/de/cpucooler/532

support doesn't mean optimization, that's what I was getting at.

 

[13thmonkey]

Is the contact area bigger than the heat spreader? If yes then they have the contact area. If you want 'optimisation' then you need server coolers, with the expense and rarity that implies.

 

[faalin]

The Xeon 2650V2 is a 95w CPU, any of the coolers above will be fine for that cpu. I ran a noctua d14 on a i7 950 which is a 130w cpu and did just fine, all of these coolers rank pretty close to the D14