Question Corsair 200R ATX Mid Tower Case? Will it Fit?

[Spartagus423]

I am working on building a new PC but I have never done it before. I am having someone put it together for me so I am bought and in the process of buying the parts.

So far my current PC that was built a few years ago has the following. I am also using the Corsair 200R ATX Mid Tower Case and I love this case. I want to avoid getting a Full tower if possible. I don't like RGB that much so in the Corsair Case it is all black with the minor blue light ontop of the case from the Video Card I believe.

UserBenchmarks: Game 72%, Desk 65%, Work 50%
CPU: Intel Core i7-4770K - 71.4%
GPU: Nvidia GTX 1070 - 79.6%
SSD: Adata XPG SX900 512GB - 49.6%
HDD: Seagate ST3750528AS 750GB - 41.3%
HDD: WD Black 750GB (2008) - 42.7%
RAM: Corsair Vengeance LP DDR3 1600 C10 4x8GB - 49.9%
MBD: Asus MAXIMUS VI HERO
========================================================

The New PC Parts I have bought are the following

I Currently bought EVGA 2080 Ti, G.Skill Trident Z RGB 16 GB (2 x 8 GB) DDR4-3200 Memory, Samsung 970 Pro SSD 1TB, ASUS ROG Maximus XI Hero (Wi-Fi) Z390 Gaming Motherboard LGA1151a, i9 9900KS Intel Processor.

I was just curious if I bought the same Mid Tower if I could fit all of this stuff in? I still need to buy Heatsink, Power Supply, DVD Drive, HDD for Storage, Fans I believe. In my current machine I had to buy a new 1070 and I had to remove the fan off the side to fit it and I have Fan on Power supply fan on top of case and Heatsink has a fan.

Sorry if I posted this is the wrong place. I had another post about building a PC in MOBO section but I was looking for general help.

Thanks again for any help you could provide me.

 

[Karadjgne]

The biggest part in there is the gpu, everything else is standard ATX. The Evga 2080ti is 291mm long, the case has 400mm of gpu clearance.

It'll fit.

 

[Spartagus423]

Thank you for the help

 

[Karadjgne]

No worries. For its size, there's an amazing amount of usable space in a 200R, although out of the 3 versions, I'd opt for the tempered glass, not the fanless acrylic or the dual fan panels, they really don't help much and do let in a bunch of dust.

Basically everything you've picked out is the same size as what you have now, and there'll be plenty of room for just the intakes and rear/top-rear as exhausts, which is all you'll need. And with 165mm of cooler clearance, there's plenty of room for a decent cpu cooler.

 

[Spartagus423]

I just don't want a bunch of RGB glowing out the side. It put it on the shelf under my desk and I don't want a bunch of RGB Glow and I want it to be quiet.

 

[Karadjgne]

Then get the solid side and don't buy or enable anything rgb, no worries. The solid sides, will be quieter overall as they'll not have side ports for sound to get out.

 

[geofelt]

Your parts will fit.
But, I am worried about cooling.
You did not state what processor you are going to use, but assuming it is a 9700K, you are going to need some good cooling.
You will also be replacing with a hotter graphics card.
The 200r specs show only one 120mm front intake which is not going to be sufficient.

I might suggest the antec P101 silent case:
https://www.newegg.com/black-antec-performance-series-atx-mid-tower/p/N82E16811129242

 

[Karadjgne]

The 200R fits 2x 120mm in the front, only 1x is included. Pretty normal for non-glass, non-rgb front panels. Paired with a rear and top-rear exhaust or a 240mm AIO on top, there's plenty of airflow, even for a 9700k. Be not enough for a 9900k/ks, but that's from a cooler standpoint, needing a 280mm/360mm AIO.

I'd suggest a couple of Noctua NF-A12x25 or the black chromax version for front intakes and move the stock fan to exhaust position.

BeQuiet Darkrock 4 or Pro, or Noctua NH-D15S or black version will take care of any cpu except the 9900k/ks.

 

[Spartagus423]

The processor I am going to use is the i9 9900KS

I am not doing liquid cooling..I need a Heat sink but there are so many choices. Also How many fans do I need?

I still need to figure out what Heat sink to get, Power supply, Optical drive, and Extra HDD for Storage.

I am using 9900Ks Intel, EVGA 2080 Ti, 970 Pro SSD 1TB, G.Skill Trident Z RGB 16 GB (2 x 8 GB) DDR4-3200 Memory, ASUS ROG Maximus XI Hero (Wi-Fi) Z390 Gaming Motherboard LGA1151a.

So now all that is left is which case to fit this stuff in a Mid Tower? Which Heat sink? What else do I need for cooling?

https://pcpartpicker.com/user/Spartagus423/saved/#view=cd6TCJ

This is what I put up. Not locked in for sure on case. All I know is I want a quiet mid tower case.