Corsair CX750M wiring help/guide

NoobUser117

Distinguished
Feb 2, 2014
63
0
18,530
Hey guys, i just received my Corsair 750m and i need a little help with the wiring part of it.

I figured out how to set up the connections for my fans/drives. however i cant figure out if the 8(actually 7 on the plug) pin the terminates into 2x6 pin connecters are the ones i need to use for my video card.

my power supply

http://www.ebay.com/itm/291303769916?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Picture of the connecters

https://www.facebook.com/photo.php?fbid=782395891838960&set=a.748960865182463.1073741826.100002056689885&type=1&theater


random question, is there a wiring guide, or a walkthrough or list that tells a person who is new to this how to set up everything??

 
4rd5.png
 
Main motherboard cable with a 20/24-pin connector, 22” (56 cm) long, permanently attached to the power supply
One cable with one EPS12V connector, 23.2” (59 cm) long, modular cabling system
One cable with two ATX12V connectors that together form an EPS12V connector, 24” (61 cm) long, permanently attached to the power supply
Two cables, each with one six/eight-pin connector for video cards, 24” (61 cm) long, permanently attached to the power supply
Two cables, each with one six/eight-pin connector for video cards, 23.6” (60 cm) long, modular cabling system
One cable with four SATA power connectors, 15” (38 cm) to the first connector, 5.9” (15 cm) between connectors, permanently attached to the power supply
One cable with four SATA power connectors, 15.7” (40 cm) to the first connector, 5.9” (15 cm) between connectors, modular cabling system
One cable with four standard peripheral power connectors, 15.7” (40 cm) to the first connector, 5.9” (15 cm) between connectors, modular cabling system
Two adapters to convert standard peripheral power connectors into floppy disk drive power connectors