Hello, i have set up my AIO in the front panel as a push pull (i dont know if that's how it's called) because it wouldn't fit at the top because of the RAM overlap.
I am not sure if the push pull is 100% correct or not because i am new to this. Basically, the corsair logo of the AIO fans is reversed (let me know if i must swap it or no).
I was unsure what to do with the fans so i decided to do that.
On idle temps i get 49-50ºC which is like 5-6ºC Cooler than what i had with the wraith prism
On ryzen master stress test i got around 70-72ºC
While running cinebench the temps ramped up to 80-82ºC
I must mention that the CPU is running at 3.8GHz at 1.231 volts.
My setup is:
EDIT: The liquid temperature is of 37-38ºC
I am not sure if the push pull is 100% correct or not because i am new to this. Basically, the corsair logo of the AIO fans is reversed (let me know if i must swap it or no).
I was unsure what to do with the fans so i decided to do that.
On idle temps i get 49-50ºC which is like 5-6ºC Cooler than what i had with the wraith prism
On ryzen master stress test i got around 70-72ºC
While running cinebench the temps ramped up to 80-82ºC
I must mention that the CPU is running at 3.8GHz at 1.231 volts.
My setup is:
- Motherboard: ASUS ROG Strix Gaming B550-F
- CPU: Ryzen 9 3900X
- RAM: Corsair Dominator Platinum RGB 2x16GB 3200Mhz
- PSU: Corsair RM750 80+ Gold
- GPU: Sapphire Pulse RX 5700 XT
- Case: Corsair 465X iCUE
EDIT: The liquid temperature is of 37-38ºC
Last edited: