Corsair H105 tubes too short

[Mahoorambo]

My Corsair H105 tubes are to short for my PC case, any solution? i was thinking about getting longer tubes, but im not familiar with dissasembly procces.

 

[spat55]

I don't think you can, that is the reason they are AIO (All in one).

 

[ShadyHamster]

Where are you trying to mount the radiator and how big is your case?
Most of the time the rad gets mounted in the top of the case which is usually close to the CPU.

And you can't disassemble the H105 cooler.

 

[Mahoorambo]

Where are you trying to mount the radiator and how big is your case?
Most of the time the rad gets mounted in the top of the case which is usually close to the CPU.

And you can't disassemble the H105 cooler.

i have X-clio 777.
and i can't fit it on top cause tube is to short, while the psu is getting in the way by being in the middle of the case.

 

[ShadyHamster]

That case has an odd layout which is why the tubes are to short.
Your only option i can see would be to get a single 120mm rad for the rear fan position or stick with air cooling.

 

[spat55]

I'd be shot of that case, it's horrid.

 

[Mahoorambo]

I'd be shot of that case, it's horrid.

its an old school case, so obviously it wouldnt fit.
but it has some ups and downs.