Corsair H110i fan configuration

[dfischer80]

I’ve just finished my first pc build and decided to install a Corsair H110i liquid cooler. I have a Corsair Graphite 760t case and have mounted the radiator in the front as intake. My question is where to have the fans, front of rad (blowing over) or inside (drawing over). I’m using the led fans that came with the case and currently have them mounted in front blowing over the rad (so they can still be seen from the front of the case). CPU temps are ranging from low 20’s C at idle to low 40’s C under stress using Intel XTU. Should I be ok with this fan placement or put them to the inside to draw over...OR could I even put the 2 fans that came with it on the inside and have 4 on the rad (push/pull)?? Current case fan configuration 2 -140 front and 1 Cougar 120 bottom intakes. 3 Cougar 120 top exhaust and 1- 140 low profile rear exhaust. Thank you in advance for any help. I’ve found this forum very helpful during my build!

 

[CooLWoLF]

Push/pull, with the 2 intake fans pulling air in from the outside over the radiator.