[SOLVED] Corsair RM650 2019 softly clicks when computer turns on

[CyborgG]

The title; should I be worried or just ignore it? Has it happened to anyone before? I've had it for a few days now. No other problems than that. Thanks

 

[Vic 40]

Might be a low power state where you hear switching of a part to keep efficiency at an acceptable level like described here,
EVGA SuperNOVA 850 T2 Clicky psu and why it is normal.
Read under,

“OMG, OMG, OMG!!! My power supply made a strange clicky noise, is it going to die?”

 

[CyborgG]

Might be a low power state where you hear switching of a part to keep efficiency at an acceptable level like described here,
EVGA SuperNOVA 850 T2 Clicky psu and why it is normal.
Read under,

Ah, thanks. My previous PSU blew up (TX650M) and I really didn't want a problem with the new one.

 

[Vic 40]

Ah, thanks. My previous PSU blew up (TX650M) and I really didn't want a problem with the new one.

Hope you rma'd? And if not why not?! Unless being able to change it for the RM ...

There could be problems with psu's from a certain time period (batch codes) from Corsair. Can look the code up,

https://forum.corsair.com/v3/attachment.php?attachmentid=38200&stc=1&d=1590785050


if between codes 194448xx to 201148xx might it be the problem they had and would rma be the way to go. This was first solely for the SF series, but have seen jonnyguru mention this with other models like the TXM as well.

 

[CyborgG]

Hope you rma'd? And if not why not?! Unless being able to change it for the RM ...

There could be problems with psu's from a certain time period (batch codes) from Corsair. Can look the code up,

https://forum.corsair.com/v3/attachment.php?attachmentid=38200&stc=1&d=1590785050


if between codes 194448xx to 201148xx might it be the problem they had and would rma be the way to go. This was first solely for the SF series, but have seen jonnyguru mention this with other models like the TXM as well.

Yeah, I did RMA the old PSU, but as the process took 4 weeks I bought a new one and am now planning on selling the TXM if all things work out.