Corsair Vengeance w/ Hyper 212 EVO & Maximus Hero MoBo

[Pedge]

Will the standard height Corsair Vengeance modules fit using a CM Hyper 212 EVO and Maximus Hero? I know they made Low Profile modules because some coolers go over the RAM slots.

I have not yet bought my components and wondering if the standard ones will fit as they appear to be cheaper than their LP counterparts (not by much but im on a budget).
If it's relevant I'll be using a Corsair Carbide 400R case.

Thanks in advance.

 

[Z1NONLY]

The mount for the fan allows you mount the fan higher on the heat sink for clearance, if needed.

I had soem RAM with rather tall heat sinks and was able to clear it by mounting a1/4"-1/2" higher on the heat sink.

Of course, you need to have a little clearance between the top of the heat sink and the case to allow for the fan-shift.

 

[rvilkman]

Also if you only have 2 modules you can put them in slots 2 and 4 instead of 1 and 3 and there should be no clearance problems.

 

[Tradesman1]

You should be fine w/ no problems 😉

 

[Pedge]

Thank you for the assuring and quick replies! I'll go with the standard modules and mess around adjusting the height of the cooler

 

[Tradesman1]

Let us know how all turns out 😉