Question Cpu Cooler Replacement Help

[ColdStew]

So i need a new cooler for my AMD FX 4300 processer and just need help with a recommendation. I think its a 70mm fan and i was wondering what one i should get to replace? It attaches via 2 clips and its a AM3+ 942 pin socket. Motherbaord is 760GM-P23(FX) MS- 7641. It has a bracket to connect the current heatsink and cooler with 2 dips. Its a 95 TDP. The heatsink sits face down on it and not vertically.

 

[hotaru.hino]

I'm presuming you don't have an FX-9370 or FX-9590. As long as you get something that's rated for at least 125W TDP and can fit AM3+, you should be fine.

 

[ColdStew]

I'm presuming you don't have an FX-9370 or FX-9590. As long as you get something that's rated for at least 125W TDP and can fit AM3+, you should be fine.

No it is and old 4300 processer

 

[hotaru.hino]

No it is and old 4300 processer

Looking about, the requirement still stands. As long as you get something that's rated for 125W TDP or higher and supports AM3+, you'll be fine.

 

[ColdStew]

Thanks for the Advice. I went with this fan, Rosewill RCX-Z1 - Long Life Ball Bearing CPU Cooler / 92 mm Silent Cooler with Aluminum Heat Sink Im guessing that is more than enough.

 

[ColdStew]

I bought an Antec A30 fan and it doesnt fit. The motherboard bracket is square and the one with the fan is a circle. what fans and heatsinks work with a 760GM-P23(FX) (MS-7641) motherboard AND Socket type AM3+ (942)?