ok thanks for the advice can you recommend a good but fairly cheap cpu fan for a ryzen 3 2200g?You got 2x options:
1) In some of the BIOS, you can set that the MoBo doesn't check CPU fan presence (aka CPU fan bypass). If your BIOS has that, you can disable it and the error won't show up anymore. But you need to be careful since without MoBo checking if the CPU fan works or not, you can easily overheat your CPU when your CPU fan actually dies.
2) Replace the CPU fan with the new one. Since it seems that your current CPU fan is faulty and can't provide it's operational state (RPM feedback) to MoBo at all times.
ok thanks mate, i have an a320m motherboard shoud it fit?Sure, here's one of the good ones with 4x color options, provided that you have at least 150mm CPU cooler clearance,
Hi i just took out the cooler but the nuts behind the motherboard where the screws are supposed to screw in has moved out of placeArctic Freezer 33 eSports ONE has AM4 socket support so it fits just fine. Though, CPU cooler clearance is determinated by the PC case you have.
i can confirm that the backplate moved, and unfortunately my pc back panel does not come offPicture of the issue would help since without it, i can't tell if the backplate moved or what happened.
If the backplate did move, open the other side of your PC case so you can access MoBo tray and put the backplate into correct position.
Can i ask do i have to put new thermal past every time or can i just put it back as it was??What kind of case you have that you can't remove the back panel to access MoBo from behind?
In any event, only thing to fix it is to screw MoBo loose and lift it out of the PC case, so you can adjust the backplate.
ok thank you for the adviceNever use old thermal paste again since as time goes onward, thermal paste (most of them) do harden over time and loose a bit of their thermal conductivity. Due to that, every time you remove the CPU cooler, use isopropyl alcohol (at least 90% pure) to remove old thermal paste completely. You'll get new thermal paste with new CPU cooler or you can buy it separately.
Here's a good vid that shows both the removal and application of thermal paste,
|Thread starter||Similar threads||Forum||Replies||Date|
|C||Question Can I replace just the fan, it`s starting to cause bio`s errors [under 600 rpm]?||Cooling||3|
|Question MCE error after removing and putting back heatsink||Cooling||1|
|D||Question cpu fan error help||Cooling||1|