[SOLVED] CPU Installation With Liquid Cooler

[sb1186]

Hey, Im trying to install a Arctic Liquid Freezer II 240 A-RGB with the AMD Ryzen 7 3700X Processor, However when I look underneath it seems to not line up with the CPU.

Has anyone come across this and is this how it should be or should it be lined up?

https://support.arctic.de/lf2-240-argb#1200

 

[Fix_that_Glitch]

Have you looked at the installation picture concerning the brackets? Are they in the proper locations?

 

[sb1186]

Have you looked at the installation picture concerning the brackets? Are they in the proper locations?

I have yes, If I am correct I should be using the AM4 standard mounting if that's correct they dont seem to line up?

 

[Fix_that_Glitch]

So what do you mean it doesn't seem to line up? The cooling plate doesn't cover the cpu? Can you post up a pic of the installation?

 

[sb1186]

So what do you mean it doesn't seem to line up? The cooling plate doesn't cover the cpu? Can you post up a pic of the installation?

Here is how I have the mounts mounted to the motherbaord. Shouldn't the gold plat from the cooler cover the top of the CPU entirely?

https://imgur.com/a/LkFedIu

View: https://imgur.com/a/LkFedIu

 

[Fix_that_Glitch]

The cooling plates are designed to cover the hot parts of the cpu. How much of the cpu is covered by the cooling plate?

 

[sb1186]

The cooling plates are designed to cover the hot parts of the cpu. How much of the cpu is covered by the cooling plate?

It's only off slightly, I was lead to believe the the cooler should always cover the entire top of the CPU.

 

[Fix_that_Glitch]

The top bracket is it touching the resistors on the left?

 

[Fix_that_Glitch]

If its only slightly you will be ok. The most important thing is to make sure you have good contact with the cpu. The top bracket is obstructed by the resistors to the left is it?

 

[Fix_that_Glitch]

*Is it obstructed from being flush?

 

[sb1186]

*Is it obstructed from being flush?

I was also concerned about this but no there not, the only way I can explain it is I can fit a mobile sim card in there so there is a little room but no much?

 

[Fix_that_Glitch]

I was also concerned about this but no there not, the only way I can explain it is I can fit a mobile sim card in there so there is a little room but no much?

ok then you are good.

 

[sb1186]

ok then you are good.

Thank you, Just for clarification which mount should I be using with regards to the instructions.

https://support.arctic.de/lf2-240-argb#1200

Should it be the standard mount or the offset mount?

 

[Fix_that_Glitch]

Thank you, Just for clarification which mount should I be using with regards to the instructions.

https://support.arctic.de/lf2-240-argb#1200

Should it be the standard mount or the offset mount?

According to the instructions Ryzen 3000 cpu should use offset, which I see now you didnt do. When you change it it will probably cover your cpu. Good catch.

 

[sb1186]

According to the instructions Ryzen 3000 cpu should use offset, which I see now you didnt do. When you change it it will probably cover your cpu. Good catch.

That's what im not sure about as using the standard mount doesn't cover the full CPU?

 

[Fix_that_Glitch]

Yes so use the offset and see if it covers the cpu fully. According to the instructions it will better align.