My system consists of
8600k with hyper 212 evo with 2 fans
msi z370m mortar
16gb ddr4
1tb m.2 ssd
rx 5700xt
650w corsair psu
I overclocked my cpu to 4.7ghz at 1.2 volt
When running cinebench r20 the freq is usually 4.7 but toward the end of the test it drops to 4.5-4.6.
question 1: Do I need to set a voltage at this freq or can I keep it on auto?
question 2: Is the cpu freq supposed to fluctuate or is it normal?
8600k with hyper 212 evo with 2 fans
msi z370m mortar
16gb ddr4
1tb m.2 ssd
rx 5700xt
650w corsair psu
I overclocked my cpu to 4.7ghz at 1.2 volt
When running cinebench r20 the freq is usually 4.7 but toward the end of the test it drops to 4.5-4.6.
question 1: Do I need to set a voltage at this freq or can I keep it on auto?
question 2: Is the cpu freq supposed to fluctuate or is it normal?
Facebook
Twitter
Instagram