Question Cpu overclocking when setting ram speed to optimal in bios.

[Juandré Rassie]

Hello. My ram is corsair vengeance 2666 2x8gb sticks. In my bios it states they only run at 2133. When i change the speed to what it what advertised for, my ryzen 5 1600x base clock goes from 3.6ghz to 3.9ghz which lets my pc crash because i dont have liquid cooling to keep the temp under control. Can i get my ram to optimal speed without having my cpu overclock? I do not know much about changing volts.

 

[rgd1101]

make and model of the motherboard?

 

[Juandré Rassie]

make and model of the motherboard?

Asus b450-plus

 

[rgd1101]

PRIME B450-PLUS｜Motherboards｜ASUS USA

ASUS Prime motherboards are expertly engineered to unleash the full potential of AMD and Intel processors. Boasting a robust power design, comprehensive cooling solutions and intelligent tuning options, these ASUS motherboards provide daily users and DIY PC builders a range of performance tuning...

www.asus.com

turn on docp/xmp ram profile in bios

 

[Juandré Rassie]

PRIME B450-PLUS｜Motherboards｜ASUS USA

ASUS Prime motherboards are expertly engineered to unleash the full potential of AMD and Intel processors. Boasting a robust power design, comprehensive cooling solutions and intelligent tuning options, these ASUS motherboards provide daily users and DIY PC builders a range of performance tuning...

www.asus.com

turn on docp/xmp ram profile in bios

Ive turned on the docp profile as well and it also sets my cpu core clock to around 3.8-3.9ghz

 

[rgd1101]

docp shouldn't change the cpu clock.

 

[Juandré Rassie]

docp shouldn't change the cpu clock.

I will change it later and send a photo of the core clock before and after docp

 

[THpapi]

Try setting RAM speed manually independently of XMP (leave it off) maybe under advanced settings or something like that.

 

[Juandré Rassie]

Try setting RAM speed manually independently of XMP (leave it off) maybe under advanced settings or something like that.

Ive tried turning docp of and setting ram speed to 2666 and then turn the cpu clock down manually to its normal base clock but when i check speeds in windows its back to being overclocked

 

[rgd1101]

if you turn on docp, don't need to set the ram speed.

 

[Juandré Rassie]

if you turn on docp, don't need to set the ram speed.

Yes i know but i tried turning docp of and manually change ram speed but i get the same result