[SOLVED] Cpu runningn 5 degrees hotter than normal at idle after overclocking 9900k to 5ghz (5 Degrees hotter at idle with overclocks off)

Aug 22, 2020
1
0
10
Hello, I recently tried to overclock my I9-9900k to 5ghz, I tried it and I didn't like the temps so I turned them off. After I turned the overclocks off, my pc took longer to boot, and was running 5 degrees hotter at idle (35 degrees), I didn't put any more than 1.300 volts into it and didn't go over 5ghz. Motherboard also beeping. Thank you, My Specs are
Cpu: Intel I9 9900k
Gpu: Gigabyte 2060 Super Gaming OC
Mobo: Asus Prime Z390-A Series
Ram: 32gb Corsair Vengeance DDR4
PSU: Rog Strix 850w White Edition
Case: Lian Li Pc O-11 Dynamic ROG Certified
Cooler: DEEPCOOL Castle 360EX
 
Solution
Hello, I recently tried to overclock my I9-9900k to 5ghz, I tried it and I didn't like the temps so I turned them off. After I turned the overclocks off, my pc took longer to boot, and was running 5 degrees hotter at idle (35 degrees), I didn't put any more than 1.300 volts into it and didn't go over 5ghz. Motherboard also beeping. Thank you, My Specs are
Cpu: Intel I9 9900k
Gpu: Gigabyte 2060 Super Gaming OC
Mobo: Asus Prime Z390-A Series
Ram: 32gb Corsair Vengeance DDR4
PSU: Rog Strix 850w White Edition
Case: Lian Li Pc O-11 Dynamic ROG Certified
Cooler: DEEPCOOL Castle 360EX
Completely Remove CMOS battery for about 5 minutes, reinsert and check everything after that.

Ferimer

Distinguished
Hello, I recently tried to overclock my I9-9900k to 5ghz, I tried it and I didn't like the temps so I turned them off. After I turned the overclocks off, my pc took longer to boot, and was running 5 degrees hotter at idle (35 degrees), I didn't put any more than 1.300 volts into it and didn't go over 5ghz. Motherboard also beeping. Thank you, My Specs are
Cpu: Intel I9 9900k
Gpu: Gigabyte 2060 Super Gaming OC
Mobo: Asus Prime Z390-A Series
Ram: 32gb Corsair Vengeance DDR4
PSU: Rog Strix 850w White Edition
Case: Lian Li Pc O-11 Dynamic ROG Certified
Cooler: DEEPCOOL Castle 360EX
Completely Remove CMOS battery for about 5 minutes, reinsert and check everything after that.
 
Solution

Latest posts