CPU still heating after replacing thermal compound

[RufioStill]

Hello, so my CPU temp was reaching 90 C for quite a few days and 10 minutes ago I replaced the paste, I cleaned everything with 99% alcohol and added a dot on the center of the size of a pea (a bit less). I made sure to put everything into place right but I don't see any difference in the temperature after turning the computer on and just browsing the internet. It gets up to 85%.I used Antec 6 compund.

Perhaps the voltage is somehow wrong in my bios? I really can't see anything else making it heat this fast and high.. I'm worried my computer will collapse anytime now.

Any help and suggestions are welcomed.

 

[JOHNN93]

this processor does reach high temperatures but for web browsing it is too much.preform a BIOS update and if you have over clocked it revert everything.if you have warranty there is nothing more you can do.

 

[RufioStill]

this processor does reach high temperatures but for web browsing it is too much.preform a BIOS update and if you have over clocked it revert everything.if you have warranty there is nothing more you can do.

How do I perform a BIOS update? Also I remember looking into OCing my CPU but never really did anything (as far as I remember). I also recently changed everything to default in the bios.

Perhaps I applied the paste wrong too? =/

Thanks for the feedback!

 

[JOHNN93]

take out the heat sink if it is applied evenly through all the surface 90%-100% you applied it correct.
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z68-V_LE/P8Z68-V-LE-ASUS-4101.zip
this is the latest bios version for your motherboard.
http://www.youtube.com/watch?v=NQKQj_aASCQ
and this is how you will update your bios with epic background music provided by asus 😉