CPU temp rose after cable management

[FadedGaming]

I decided to cable manage my PC and after getting done and plugging everything in I noticed that the temps on my PC rose alot and the software I was using decided not to work correctly anymore. I have a i7 4790k and a corsair h100i gtx. Everything was working fine prior to me cable managing my pc. My idle temps never went about 25c and i usually peaked at like 35c now im idling at around 30-33c and hit 50c. Its saying that one of my fans is not running evem tho both are and its not showing me some pump information. Someone please help me fix this ?

 

[lateralnw]

Couple of thoughts.

dislodged the power connector that runs the pump. Perhaps it looks like it is still plugged in but is just out enough to not power up the pump anymore.

I'm assuming you are using:
Are you still using the Zalman LQ310 liquid cooling? Is it possible that you have put a kink in the pipes or twisted them and reduced flow?


good luck.

 

[FadedGaming]

Couple of thoughts.

dislodged the power connector that runs the pump. Perhaps it looks like it is still plugged in but is just out enough to not power up the pump anymore.

I'm assuming you are using:
Are you still using the Zalman LQ310 liquid cooling? Is it possible that you have put a kink in the pipes or twisted them and reduced flow?


good luck.

I am using the corsair h100i gtx. it says the pump is still working just one of the fans butr both of the fans are working. No kinks in the pump either and not even had it for 5 months yet so I dont think it could be any build up?