CPU temperature of Q6600

[metmyworld]

Iam using Everest Ultimate Engineers edition 5.0
it shows cpu temperature of Q6600 as 48c And cores as 49-45-45-49
When it comes to core temp it shoes cores as 57-55-57-56
When in Real temp it shows 27-26-27-27
I overclockes my Q6600 to 3.0Ghz at 1.2500v
mobo GA-X38-DS5

 

[Zorg]

None of that makes any sense. All programs should match or at least be within 5C.

Run Core Temp and Real Temp again and check idle temps, they should match. If Real Temp is 5C low then rely on Core Temp.

Then load Prime95. Run the torture test with small FFTs.

Post idle and Prime95 small FFT load temps for each core, those will make sense.

 

[metmyworld]

None of that makes any sense. All programs should match or at least be within 5C.

Run Core Temp and Real Temp again and check idle temps, they should match. If Real Temp is 5C low then rely on Core Temp.

Then load Prime95. Run the torture test with small FFTs.

Post idle and Prime95 small FFT load temps for each core, those will make sense.

here the temperatures 27-27-26-26 Real temp
Core temp 57-56-57-55

 

[Zorg]

Ok, let's make this simple.

I want two sets of numbers with Core Temp. One labeled idle, that were taken when the machine isn't doing any work, and one labeled Core Temp Prime95 small FFT temps, that were taken while running Prime95 small FFT torture test.

It should look like this.

Core Temp idle temps xx-xx-xx-xx
Core Temp Prime95 small FFT temps xx-xx-xx-xx.