They are probably caused by the same thing, my CPU Temps and fan speeds stopped showing up on CPU HWMonitor app, even tho everything was looking correct there was obviously something wrong with my sensors or something. Tried restarting the PC and going to BIOS and everything looks fine. Can see CPU temperatures fan speeds etc. Then tried checking the CPU-Z which used to run completely without problems yesterday returned an 'error code 0x287 (647) occured during initialization' here is the error log file;
It turned out that it can be a bigger issue, maybe related to the motherboard because i am not able to see Mermory, Mainboard and SPD infos on the CPU-Z they are almost totally blank. I would like to share the screenshots but the system is not allowing me to.
[bInitDriver] path = C:\Windows\temp
[bInitDriver] GetCurrentDirectory = C:\Program Files\CPUID\CPU-Z
[bInitDriver] GetModuleFileName = C:\Program Files\CPUID\CPU-Z\cpuz.exe
[vGetOSVersion] m_iOSVersion = 2 (10.0), SHA2 = 1
[vGetOSVersion] IsAMD64=0, IsIA64=0, IsAlpha=0, SHA2=1
[bInitDriver] Extract dir = C:\Windows\temp\cpuz149\
[bInitDriver] m_szPath_2=C:\Windows\temp\cpuz149\, m_szFilename=cpuz149_x64.sys
[WinNT_hCreateServiceHandle] CreateFile cpuz149 returned 2 (0x2)
[WinNT_bInstallDriver] szMachineName = DESKTOP-RPLNEM7
[bDeleteFile] DeleteFile C:\Windows\temp\cpuz149\cpuz149_x64.sys failed (error = 3)
[bDeleteFile] RemoveDirectory C:\Windows\temp\cpuz149\ failed (error = 2)
[dwExtract_SYS] Extract C:\Windows\temp\cpuz149\cpuz149_x64.sys
[WinNT_bCreateService] szDestName = C:\Windows\temp\cpuz149\cpuz149_x64.sys
[WinNT_bStartService] StartService failed, error code = 647
[bInitDriver] bInitDriver returned 647
[WinNT_dwStopService] OpenService failed, errorcode = 1060
[WinNT_dwDeleteService] Openservice failed, errorcode = 1060
[bDeleteFile] DeleteFile C:\Windows\temp\cpuz149\cpuz149_x64.sys succeeded
[bDeleteFile] RemoveDirectory C:\Windows\temp\cpuz149\ succeeded
[vCloseDriver] CloseHandle(mutex) = 1
[bInitDriver] GetCurrentDirectory = C:\Program Files\CPUID\CPU-Z
[bInitDriver] GetModuleFileName = C:\Program Files\CPUID\CPU-Z\cpuz.exe
[vGetOSVersion] m_iOSVersion = 2 (10.0), SHA2 = 1
[vGetOSVersion] IsAMD64=0, IsIA64=0, IsAlpha=0, SHA2=1
[bInitDriver] Extract dir = C:\Windows\temp\cpuz149\
[bInitDriver] m_szPath_2=C:\Windows\temp\cpuz149\, m_szFilename=cpuz149_x64.sys
[WinNT_hCreateServiceHandle] CreateFile cpuz149 returned 2 (0x2)
[WinNT_bInstallDriver] szMachineName = DESKTOP-RPLNEM7
[bDeleteFile] DeleteFile C:\Windows\temp\cpuz149\cpuz149_x64.sys failed (error = 3)
[bDeleteFile] RemoveDirectory C:\Windows\temp\cpuz149\ failed (error = 2)
[dwExtract_SYS] Extract C:\Windows\temp\cpuz149\cpuz149_x64.sys
[WinNT_bCreateService] szDestName = C:\Windows\temp\cpuz149\cpuz149_x64.sys
[WinNT_bStartService] StartService failed, error code = 647
[bInitDriver] bInitDriver returned 647
[WinNT_dwStopService] OpenService failed, errorcode = 1060
[WinNT_dwDeleteService] Openservice failed, errorcode = 1060
[bDeleteFile] DeleteFile C:\Windows\temp\cpuz149\cpuz149_x64.sys succeeded
[bDeleteFile] RemoveDirectory C:\Windows\temp\cpuz149\ succeeded
[vCloseDriver] CloseHandle(mutex) = 1
It turned out that it can be a bigger issue, maybe related to the motherboard because i am not able to see Mermory, Mainboard and SPD infos on the CPU-Z they are almost totally blank. I would like to share the screenshots but the system is not allowing me to.
Last edited: