CPUZ detects wrong Ram settings

[intellectualpwer]

In my bios i set my ram to 2.2v 4-4-4-12 at ddr2-850. for some reason when i look at Cpu-z under the memory tab the timings are 9-12- -0. there is one that is just empty. Cpuz also says that my Ram is running in single channel mode, although i set it up to be dual channel. Is this just a problem with cpu-z or is it because I am running the fsb at 425? Should i change by RAM timings?

gigabyte 965p-ds3
crucial ballistix ddr2-1000
e6400
ocz gamexstream 600
8800gts

 

[rwaritsdario]

Use Memset to check your RAM timings. If your FSB is detected correctly it must be a bug in CPU-Z. Also use Memtest86+ to test RAM stability.

 

[Mondoman]

.... Also use Memtest86+ to test RAM stability.

Yes! To the OP: how do you know your system is running without errors at your current OC settings?

 

[intellectualpwer]

hi, i used memset and it detected the right settings for my ram. i am not sure if the ram is stable or not, but the cpu definitely is stable as i just finished 11 hours of orthos. i think the problem is in cpuz itself. but ill be running memtest86+ to check the ram later. thanks for the advice guys.