Creating a network with a single wireless computer

G

Guest

Guest
Archived from groups: microsoft.public.windows.networking.wireless (More info?)

We are a training facility. We would like to set up a classroom with up to 16 computers through a single wireless connection. Here's what I'd like to do: I would have one computer with a wireless NIC card that would connect to the network through a wireless router. 16 additional computers would connect to the one wireless computer through standard cable connections using a hub. Would this work or do all 17 computers have to have wireless NIC cards?

TIA,
Julie Kleckner
Cincinnati, OH
 
G

Guest

Guest
Archived from groups: microsoft.public.windows.networking.wireless (More info?)

Yes, each computer will half to have it's own wireless card!
"JEWLS8896" <JEWLS8896@discussions.microsoft.com> wrote in message
news:8B2FD8EF-28B4-4FF0-8CAD-271DA54EB072@microsoft.com...
> We are a training facility. We would like to set up a classroom with up to
16 computers through a single wireless connection. Here's what I'd like to
do: I would have one computer with a wireless NIC card that would connect to
the network through a wireless router. 16 additional computers would connect
to the one wireless computer through standard cable connections using a hub.
Would this work or do all 17 computers have to have wireless NIC cards?
>
> TIA,
> Julie Kleckner
> Cincinnati, OH
 

Jack

Distinguished
Jun 26, 2003
1,276
0
19,280
0
Archived from groups: microsoft.public.windows.networking.wireless (More info?)

Hi.

It will work the way you describe it.

You would have to put a regular NIC in the computer with the Wireless
Client, connect the Hub to the Wired NIC and the 16 computers to it you will
need to set manual IPs or have a DHCP server on the source computer.

Doing so would creates two Networks. Network One on the Router, and network
Two on the Hub.

If you use WinXP you can Bridge the two Networks.

However it is much simpler to leave the Wireless computer alone and connect
a consumer Bridge to the hub (like Linksys WET11) . The 16 computers can be
connected with wires to the Hub and you will have One big "Family"
(Network).

About Wireless Modes here: http://www.ezlan.net/Wireless_Modes.html

Jack (MVP-Networking).



"JEWLS8896" <JEWLS8896@discussions.microsoft.com> wrote in message
news:8B2FD8EF-28B4-4FF0-8CAD-271DA54EB072@microsoft.com...
> We are a training facility. We would like to set up a classroom with up to
16 computers through a single wireless connection. Here's what I'd like to
do: I would have one computer with a wireless NIC card that would connect to
the network through a wireless router. 16 additional computers would connect
to the one wireless computer through standard cable connections using a hub.
Would this work or do all 17 computers have to have wireless NIC cards?
>
> TIA,
> Julie Kleckner
> Cincinnati, OH
 
G

Guest

Guest
Archived from groups: microsoft.public.windows.networking.wireless (More info?)

You need another type of device called Wireless Bridge.
Check for example at DLink

--

"JEWLS8896" <JEWLS8896@discussions.microsoft.com> wrote in message news:8B2FD8EF-28B4-4FF0-8CAD-271DA54EB072@microsoft.com...
> We are a training facility. We would like to set up a classroom with up to 16 computers through a single wireless connection.
Here's what I'd like to do: I would have one computer with a wireless NIC card that would connect to the network through a
wireless router. 16 additional computers would connect to the one wireless computer through standard cable connections using a
hub. Would this work or do all 17 computers have to have wireless NIC cards?
>
> TIA,
> Julie Kleckner
> Cincinnati, OH
 

TW

Distinguished
May 1, 2004
84
0
18,630
0
Archived from groups: microsoft.public.windows.networking.wireless (More info?)

Your idea will work as long as the wireless router is physically connected
to the hub with a cable thus making it part of the same segment. You should
also put the wireless router in the same subnet as the rest of the network
for network browsing, then you won't need a bridge.

I use both wired and wireless through a Dlink DI624 and all machines can
access all network shares without any problems. I also don't use or need a
bridge.


"Pavel A." <pavel_a@geeklife.com> wrote in message
news:OdggzNOeEHA.3212@TK2MSFTNGP10.phx.gbl...
> You need another type of device called Wireless Bridge.
> Check for example at DLink
>
> --
>
> "JEWLS8896" <JEWLS8896@discussions.microsoft.com> wrote in message
news:8B2FD8EF-28B4-4FF0-8CAD-271DA54EB072@microsoft.com...
> > We are a training facility. We would like to set up a classroom with up
to 16 computers through a single wireless connection.
> Here's what I'd like to do: I would have one computer with a wireless NIC
card that would connect to the network through a
> wireless router. 16 additional computers would connect to the one wireless
computer through standard cable connections using a
> hub. Would this work or do all 17 computers have to have wireless NIC
cards?
> >
> > TIA,
> > Julie Kleckner
> > Cincinnati, OH
>
>
 

ASK THE COMMUNITY