Question Critical Process Died ?

[manolis kokotsakis]

Hello,
1 month ago, i got this message on my screen. Since , i wrote the case to a forum in my country, and ask friends, more experienced than me , with out any succes till now, thats why i ask your help now.

I tryed allredy, check ram, nvme, temp, and all hardware.
I tryed all sofware solutions , check from comand prompt all advice the offer me, nothing.

Finaly , 2 days ago, i did for second time format , to win 11. Nothing. 2-3 times a day, i have the same blue screen.

my pc specs

ASRock H610M-H2/M.2 D5​

i31200,
16gb ram ddr5 kingston 4800,
psu, corsair CX430,

I hope for your help..​

 

[ex_bubblehead]

And, he most likely still hasn't replaced that junky power supply. You were warned up thread that this would be a problem.

 

[logainofhades]

It's only a matter of time before that PSU dies and takes hardware with it. I guess then he can get a whole new PC.

 

[Colif]

It's only a matter of time before that PSU dies and takes hardware with it. I guess then he can get a whole new PC.

that is a new PC, I don't want to remember what his last one looked like.

What PSU do we suggest he get so that he gets a good one?

 

[logainofhades]

that is a new PC, I don't want to remember what his last one looked like.

What PSU do we suggest he get so that he gets a good one?

He can get another new PC then. I learned that lesson the hard way, myself. What to get would depend on what's available in his area. Even the latest model of Corsair CXM650 is better than those old CX430's.

 

[manolis kokotsakis]

Hi again sir, sorry to delay answering you
This program what data will install of error if there is no problem happening the lust 2 eeeks ?
Will i intsll it you mena, in case something happened again to see this comes form where ?

 

[manolis kokotsakis]

He can get another new PC then. I learned that lesson the hard way, myself. What to get would depend on what's available in his area. Even the latest model of Corsair CXM650 is better than those old CX430's.

Sorry , i dont understand . The problem didnt fix now, for more than tqo weeks wih the same psu ? I dont have this as fact ? I need to change psu if this is working well and i only return to my old screen ?

 

[Ralston18]

@manolis kokotsakis

1) The "Critical Process Died" error problems began when you replaced your monitor (screen) with a different monitor (screen) and then the problem went away when you put the original monitor back. Is that correct?

2) And there have not been any "Critical Process Died" errors since you put the old monitor back - is that also correct?

3) And you do not believe that the problem is the PSU despite multiple posts with that concern - correct?

What is needed is to find more error codes and warnings that may help diagnose the problem. There are several ways to do so and some of those ways have been suggested.

Here is what you must do if you wish to learn more about the possible reasons:

Open Reliability History/Monitor and expand the window so all can be seen. Note the "View by" choice. Select Weeks.

Here is a link to explain how to do that:

https://www.computerworld.com/artic...ting-windows-10-with-reliability-monitor.html

Note: the name can and does "change" between History and Monitor. Just ignore that the name changes.

When you have the Reliability History/Monitor window open and fully visible take a screenshot and post that screenshot here via imgur. Follow the imgur instructions/link provided by @Colif in Post #17.

You must be: 1) fully sucessful in opening and running Reliability Monitor/ History, 2) able to take a screenshot of the Reliability History /Monitor window, and 3) be able to post that screenshot here via imgur.

The objective is to look at the errors etc. being captured by your system during the last two weeks after the original monitor (screen) was put back into place. If you remember be sure to post the dates you changed monitors.

Stop with that - do not and avoid making any further system changes. When you change too many things that causes confusion and makes troubleshooting very difficult.

= = = =

The next test, if needed, will be to put the new screen (monitor) back into use. Watch if the "Critical Process Died" errors return.

If the "Critical Process Died" message returns then you will reopen Reliability History/Monitor and take some additional screenshots. Those screenshots may provide more information about what is happening.

Other tools (such as Sysnative BSODCollectionApp) may then be used to learn more about the problem, the cause, and how to fix the problem. However, only you will be able to do those things and then likewise be able to accurately and fully post the results.