Cross Fire A88M-G/3.1

[hydrogaming23]

Just bought the Asrock A88M-G/3.1 board for my 880K, I install the Sapphire RX470 Nitro+, I was planing to buy another RX470 Nitro to cross Fire, is it possible?, It seems the space of the slot is quite close to each other.

I am using the FSP Hydro 500w, should it be enought to power up the system with crossfire?

 

[Potato825]

Your motherboard does not support Crossfire

 

[Gam3r01]

Since the secondary PCIe lane only runs in x4 mode, I would not recommend Xfire.
Nor would I recommend it with such a dated processor.
Nor would I recommend Xfire with two low end cards.

 

[hydrogaming23]

Your motherboard does not support Crossfire

Since the secondary PCIe lane only runs in x4 mode, I would not recommend Xfire.
Nor would I recommend it with such a dated processor.
Nor would I recommend Xfire with two low end cards.

This?
http://www.asrock.com/mb/AMD/A88M-G3.1/?cat=Specifications

 

[Gam3r01]

Yes I am referencing the board you posted. Points still stand.
While it technically supports Xfire (as it can be enabled on an x4 lane) you really should use at least x8 lanes, which is what SLI requires.
- 1 x PCI Express 2.0 x16 Slot (PCIE3 @ x4 mode)

 

[hydrogaming23]

thanks for the info...I am new to PC so question is full...thanks Gam3r01

 

[Potato825]

https://pcpartpicker.com/product/yVwqqs/asrock-motherboard-a88mg31

 

[hydrogaming23]

Try It, even though it has crossfire capibilities but 2 GPU can fit, the top GPU fan touches the back plat of the second GPU....

 

[Supahos]

Don't click that link