[SOLVED] Crossfire 1 x16 pcie mITX

[adrmz123]

Hello. Can you do crossfire on a mITX, using 1 x16 pcie slot to 2 x16 pcie slot riser and making the 2 GPU's one slot & water cooled?
Thanks.

 

[kerberos_20]

pci-e gpus needs 75watts each from pci-e slot, single pci-e slot cant feed 150watts...it will melt
so u may need to look for powered ones
but i cant see any dual for gpus
this is available on market (mining stuffs)

 

[BFG-9000]

Only if your BIOS supports PCIe bifurcation, or you get an adapter with a PCIe switch chip. And yes, it will need to be externally powered too.

Dual GPUs on one card such as the Radeon Pro Duo (Fiji XT) come with a switch chip right on the card.

 

[kerberos_20]

nvidia titan Z comes to my mind, also dual gpu

 

[adrmz123]

Thank you for the responses

I found some risers, you guys think any of this will do the job?

https://www.supermicro.com/support/resources/Riser.cfm

 

[kerberos_20]

i doubt that
in your link select in category GPU, design type ACTIVE
u could see that what gets listed wont fit your mainboard, unless u have server board