I have just bought and installed 4 sticks of Crucial Ballistix 1GB with the timings 3-3-3-12 (http://www.crucial.com/store/partspecs.aspx?imodule=BL2KIT12864AA663) and installed it on Asus P5W DH Deluxe motherboard.
In the BIOS > Advanced > Chipset, when disabling the "Configure DRAM Timing by SPD" setting, I can manually enter the following (in the same order):
- CAS Latency (defaults to 5 clocks)
- RAS Precharge (defaults to 4 clocks)
- RAS to CAS Delay (defaults to 4 clocks)
- RAS Activate to Precharge Delay (defaults to 15 clocks)
- Write Recovery Time (defaults to 4 clocks)
Two questions:
1. When the "Configure DRAM Timing by SPD" setting is enabled, can I expect the timings to be as specified by Crucial, or the BIOS defaults?
2. If manually entering them, I believe I should enter the following (in the order presented above): 3 - 3 - 3 - 12 - ??
The question here is, what is the Write Recovery Time, I don't find that info on the memory sticks....
In the BIOS > Advanced > Chipset, when disabling the "Configure DRAM Timing by SPD" setting, I can manually enter the following (in the same order):
- CAS Latency (defaults to 5 clocks)
- RAS Precharge (defaults to 4 clocks)
- RAS to CAS Delay (defaults to 4 clocks)
- RAS Activate to Precharge Delay (defaults to 15 clocks)
- Write Recovery Time (defaults to 4 clocks)
Two questions:
1. When the "Configure DRAM Timing by SPD" setting is enabled, can I expect the timings to be as specified by Crucial, or the BIOS defaults?
2. If manually entering them, I believe I should enter the following (in the order presented above): 3 - 3 - 3 - 12 - ??
The question here is, what is the Write Recovery Time, I don't find that info on the memory sticks....
