cryorig h7 fan

[gary_murphy101]

after installation. i realised that the fan on the cooler is blower air towards the front of the case instead of towards to exhaust at the back. Can i just unclip it and put it on the other side or do i need to take the cooler off and do it

 

[bignastyid]

You can just remove the fan and flip it around. There should be no need to remove the cooler.

 

[gary_murphy101]

You can just remove the fan and flip it around. There should be no need to remove the cooler.

thanks for the fast reply. i have been getting high temps do you think the fan being the wrong way could be a contributing factor. 8600k z370 16gb ddr4 1060 6gb

 

[bignastyid]

You can just remove the fan and flip it around. There should be no need to remove the cooler.

thanks for the fast reply. i have been getting high temps do you think the fan being the wrong way could be a contributing factor. 8600k z370 16gb ddr4 1060 6gb

If its going against the air flow in the case it could most definitely be the cause of the high temps.

 

[scout_03]

did you set you fan this way if not unclip and turn it atourn to you see the logo on the fan from front https://www.youtube.com/watch?v=kNF-GHQthro

 

[gosubuilder]

how much paste did you use?

I've experienced *cough* a situation where too much thermal paste was causing the temps to be high... ok that was embarrassing... (it was long long time ago before I found the pros on this forum)

 

[gary_murphy101]

how much paste did you use?

I've experienced *cough* a situation where too much thermal paste was causing the temps to be high... ok that was embarrassing... (it was long long time ago before I found the pros on this forum)

used the pee sized bro

 

[gary_murphy101]

did you set you fan this way if not unclip and turn it atourn to you see the logo on the fan from front https://www.youtube.com/watch?v=kNF-GHQthro

i installed the cooler with the fan attached. used the pc a few months and been getting high temps. used artic silver 5 a pee sized amount