Cursor moves and jumps at maximum lift height.

[kol12]

I have a new Corsair Sabre optical. The cursor likes to move and jump a lot when lifting the mouse, I'm sure there's a name for this... This is not ideal in a gaming situation as it causes the camera to pan erratically when lifting the mouse... Lift height is set to low in CUE software but the actual lift height is very high before the cursor will stand still. It doesn't appear to be a cable interference. Not sure where else to go with it...

 

[bigpinkdragon286]

While I don't have that mouse myself, Google tells me that has been an ongoing problem with that mouse. Users set lift height to different settings and get no tangible benefit. If using the latest software, drivers, and firmware doesn't immediately allow you to set a proper lift height that works for your purposes, I would return it for another mouse. There's easily been enough time to remedy the problem, meaning no further fix is likely inbound.

 

[kol12]

Well I will be returning the mouse anyway because the scroll wheel is not right, it's loose and ticking. Also the pure white in the RGB is light blue!

I had the laser Sabre before this and I did not have lift height problem this one does so maybe it's and issue with the optical sensor... Also the white led was the pure white you would expect.