[SOLVED] Curved Motherboard and VRM cooling problem

[Leonexgen]

Hi there !
After many years I decided to replace thermal pad on the VRM section of the motherboard. I used 1mm Arctic Thermal Pad 6.0 W/mK ( this brand is the only available on my region with 0.5, 1 and 1.5 mm thickness variations). After replacing I noticed upper and lover sides of the Thermal pad is roughly squished but middle pat was barely touched as I explained in the picture. Any ideas to solve this ?

 

[SkyNetRising]

Put additional layer of thermal pads in the blue zone.

 

[Leonexgen]

Put additional layer of thermal pads in the blue zone.

Thank you for the suggestion, If I add another 1mm layer to blue zone properly, will it decrease perfomance ? I will surely give it a try in couple hours.