Hello!
I just finished assembling my custom build:
i5-12600K
MSI Z690-A DDR4 ProSeries
Zotac Gaming GeForce GTX 3080 10GB
Corsair RM750x
Corsair Vengeance LPX 32GB (4 x 8GB) DDR4 3600 MHz
SDD from my previous build
HDD from my previous build
When I start the computer, the EZ debug CPU light stays red for 3s, then blink orange on DRAM, then VGA light white for 2s then back to red for 2s then all EZ debug lights go off.
I see nothing on my screen, it keeps scanning for signal from HDMI 1, HDMI 2 and DP but nothing comes up on the screen.
PSU fan doesn't run (I assume it's because of the low load/temperature)
GPU fan run for 5s then stop (same)
System and CPU fans run fine
I tried remounting the CPU, removing the battery on the MB for 10 mins, loading with 2 RAM, using the MB HDMI port, but nothing made a difference so far.
I would greatly appreciate your help!
I just finished assembling my custom build:
i5-12600K
MSI Z690-A DDR4 ProSeries
Zotac Gaming GeForce GTX 3080 10GB
Corsair RM750x
Corsair Vengeance LPX 32GB (4 x 8GB) DDR4 3600 MHz
SDD from my previous build
HDD from my previous build
When I start the computer, the EZ debug CPU light stays red for 3s, then blink orange on DRAM, then VGA light white for 2s then back to red for 2s then all EZ debug lights go off.
I see nothing on my screen, it keeps scanning for signal from HDMI 1, HDMI 2 and DP but nothing comes up on the screen.
PSU fan doesn't run (I assume it's because of the low load/temperature)
GPU fan run for 5s then stop (same)
System and CPU fans run fine
I tried remounting the CPU, removing the battery on the MB for 10 mins, loading with 2 RAM, using the MB HDMI port, but nothing made a difference so far.
I would greatly appreciate your help!
Last edited: