Custom build that booted before but won't boot now.

[Orangeduck]

So I built myself a computer yesterday and I decided to boot it up. I was aware that everything wasn't fully complete but I made sure that I had everything essential so I could boot it up since I wanted to see if all of my parts worked. It did work and the temperatures were all right for everything. But then this morning I was messing around with it my bedroom on my desk to plug some of the cables that I didn't get to yesterday. So I booted it back up today I got the correct lights on the motherboard, correct light for the ram, and all of my fans were running fine but I didn't get any signal. After that I unplugged everything that I didn't have plugged in when it booted and I still got the same results. I'm pretty sure it's either the graphics card or the processor. I cannot make a test for the graphics card though since I don't have integrated graphic on my motherboard. And I don't really know how to do anything beep tests on my motherboard. Also one of my friends told me that I could have damaged something with static electricity since I was standing on a carpet and tinkering with it on a desk. If I could get some help that would be great. Thanks!

 

[Vic 40]

Maybe reinstall everything again (start from scratch) and do a clear cmos while you're at it so the motherboard is back to basics.How to do the clear cmos can be read in the manual that should be at your side while doing this kind of stuff.

When adding the other connectors all parts were still outside a case?

Beeps can only be heard when a motherboard speaker is installed so do that if you want to know more via that way.The speaker comes normally with the case and how to connect it can be read in that manual again.

 

[Orangeduck]

Maybe reinstall everything again (start from scratch) and do a clear cmos while you're at it so the motherboard is back to basics.How to do the clear cmos can be read in the manual that should be at your side while doing this kind of stuff.

When adding the other connectors all parts were still outside a case?

Beeps can only be heard when a motherboard speaker is installed so do that if you want to know more via that way.The speaker comes normally with the case and how to connect it can be read in that manual again.

None of what you recommended worked. Is there anything else I can do?

 

[Vic 40]

Can you test the gpu in another system? Maybe from a friend or ...